just for the records, it works with FSUIPC but not with simconnect.
I don't care as long as I can use your beautiful program.
Thanks Tim

Problem solved !!!
Followed the instruction taken from the link you gave me and finally this nightmare is over.

thanks a lot Tim

ciao
Ezio

Hi Tim,
is on a single PC with double screen, one for FS and the other for Plan-g

here are the attachment.
I had to turn them to txt extension atherwise they were not accepted as attachments
I added also a copy of IPconfig
Thanks for the attention.
Ezio

I followed all instruction indicated in the post and I created a new simconnect.xml file and relevant simconnect.cfg moving them where they should go.
Using Simconnect as communication, with P3D running and Plan-G open, hitting the connect button does not show the aircraft icon and does not go to the aircraft location.
Using FSUIPC as communication, it works, but one way only: i.e. the aircraft icon appears at the right location, but any attempt to send input to P3D causes the Plan-G shut down.
Tipically right clicking on a VOR to send the frequency to Nav 1 shuts down the program.

can anybody suggest a solution ?

Thanks
Ezio

T be 100% sure I unistalled v.3.2.1 and installed V.3.2.2 butno change in the situation not for FSUIPC nor for Simconnect.

This is the part of log file related to simconnect

15:08:55.8 SetFSConnected: System.IO.FileNotFoundException: Non è stato possibile caricare il file o l'assembly 'LockheedMartin.Prepar3D.SimConnect.dll' o una delle relative dipendenze. Impossibile trovare il modulo specificato.
Nome file: 'LockheedMartin.Prepar3D.SimConnect.dll'

In the main directory of Plan-g I have both FSUIPC.client.dll and LockheedMartin.Prepar3D.SimConnect.dll.
Selecting FSUIPC or XFSUIPC I have the same result: Plan-g connects and the yellow air plane appears in the right position and it moves correctly, but when I try the option of setting frequency to NAV1, plan-g stop and close.

I'm giving-up with simconnect and use FSUIPC5151 and may be the problem I have with it could be easier to resolve.

here is the log file after I set the connection to FSUIPC and trying to set NAV1 frequency from Plan-G.
and Plan-G shuts down.
See if can be useful

Thanks

Ezio

Hi Tim
I'm running Prepar3D_v4_Academic_4.5.13.32097
Before sending you the log file, I read it and I noticed that LockeedMartin.simconnect.dll is required.
I checked the P3D main directory, where all Dll are, and I could't find it.
I reinstalled from scratch the all program but still the dll is not there.
Upon completion of the installation I had the attached screen.
In the redistr directory I found Simconnect.msi but when I launch it I got an error 2503 and 2502 error message and the installation stops.
It seems is something I have to sort out with Lockeed Martin.
Thanks anyway for your support.

Ezio

I attach the log file after starting P3D then starting Plan-g and click on "connect"
thanks for your patience

here is the loc file

Hi Tim,
I reinstalled Plan-G 3.2.1 and ,just in case also P3D v.4.5, but I have the same results.
In the options FS connection don't have FSX as default, but still P3D with the port number 4505 which I typed in the previous session trying to modify the cfg file. and even the map started with the last position i had before unistalling.
I even tried to install V 3.2.0 so I had the port 0 and the default UK map, but still no connection with simconnect and the same problem with FSUPC5 (one way connection).
I wish to be able to solve this problem , because your Plan-g is definetely the best moving map/flight planner I had through the years and I cannot use any flight simulator without it

Single PC with two monitors, one for P3d the other for Plan-g

Thanks Tim,
I tried all the suggested numbers, but still, when I click on "connect" nothing happens (plane position is not shown on the map).
Using FSUPC5 as connection, the plane symbol appears and everything works, but if I use the function "set ILS frequency in NAV 1", Plan-g Shuts down.
It seems that communication is one way only.

I read the post of Tim Arnot and I created the Simconnect.xml with my PC ID address, but I have no idea of how to find an available port number to insert into the simconnect.cfg.

can anybody help me?

Hi,
how can I clear the red track of the previous flight?
if I start a new flight from another airport, there is a track from the airport where I landed straight to the airport from where I want to start the new flight.

thenks for the attention

Ezio