Found out that after Plan G installation for X10 plane using the XPUPC plugin, there is a setting in World Traffic that let u configure X10 Plane to select up to 20 planes. 

Then u go to World Traffic, select your Airport, do a Resync, go to World Traffic Radar and if u follow the instructions correctly, u will be able to track the planes in Plan G.  The only drawback is that since World Traffic radar can track up to 80 nm, you can only see the planes in Plan G up to 80 nm.

The cool thing is that using World Traffic (payware) and Plan G, when a plane is within 80 nm, and it is coming in for a landing, you can track it using the World Traffic radar and Plan G simultaneously until the plane lands.
There are specific instructions on how to set this up in the World Traffic manual.
Hope this helps !!

Hi,
Can Plan G interface with X-10 Plane new World Traffic Plugin?  It will be so cool to track planes with Plan G taking off and landing using the X-10 Plane World Traffic Plugin. 

Tim,
Spent more than 1 hour and finally found out on the Top Menu > Data > Display X-Plane 9/10 Data was not checked.  After checking it, that did it, works fine now.  Still have one minor problem, when i right click on an Airport icon > Show Airport Diagram, the airport do not display correctly. 
Please, see attached JPEG file.
Again thanks for all your help.

Mario

Hi Tim,
Due to a hard drive crash had to reinstall Win 10, 64 Bit in a new SSD drive.  Everything went fine as i had a drive backup, except for Plan G3.
Installed Plan G3 (v3.1.3.113) and build the database as per the manual, however when i tried the Quick Plan feature, after i type the first three letters for the Airport, i.e. KJFK the rectangle becomes red.

Also, when i go to View and check Map Overlays, nothing comes up.
My previous Plan G3 was working flawlessly.  Can't figure this one out.
Any help will be appreciated,
Thanks,

Mario
:(  :(

Hi Tim,
Finally, checked everything as per your advise and found out that after downloading all the files from NOAA. 

When i unzipped the files to the DEM directory, for some reason each file were unzipped with a folder.  I simply moved each file inside the folder to the DEM directory and VIOLA, everything works now.  Finally, i can now view the Plan Elevation.
Thanks for your help,

Mario
:laugh: :laugh:

Tim,
Tried creating a flight plan as a .plg, reopening it and still Plan Elevation remains blank.  Any other ideas  ??? ???
Thanks

Hi Tim,
I created and saved a flight plan using Plan G v3.1.3 as a plg file.  I am running X10 plane.  When i click view > Plan Elevation still i get nothing.  Do I have to convert the plg file to fms to be able to see the Plan elevation?
Everything else on Plan G works flawlessly.
Thanks for your help ! !

Hi Tim,

So far I downloaded four DEM files and extracted them to C:\users\------------\Documents\Plan-G files\Dem.  Created a quick flight plan with 3 waypoints.  When i go to View> Plan Elevation, still nothing comes up.  Attached is my log file.
Will appreciate if u can look at it and tell me what's wrong.
Thanks for your help,

Mario

10:23:55.3

---===+++===---

10:23:55.3 Starting Plan-G (W7 edition), build 3.1.3.109
10:23:55.3 OS is Microsoft Windows NT 6.2.9200.0
10:23:55.4 InitDataFolder
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_NAVI.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\UserWaypoints.sdf
10:23:55.4 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\MEF.sdf
10:23:55.8 Map tiles cache: C:\Users\MALBERTO\AppData\Local\GMap.NET\
10:23:55.9 Program in: C:\Program Files (x86)\Plan-G v3.1.3
10:23:55.9 Data in: C:\Users\MALBERTO\Documents\Plan-G Files
10:23:55.9 IsDataLoaded: FSX
10:23:55.9 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:23:56.0 IsDataLoaded: FS9
10:23:56.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:23:56.0 IsDataLoaded: XPlane
10:23:56.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:23:56.1 ASI: numIncrement = 50 incremental = 60 GPS_MaxAirspeed = 300
10:23:56.2 Starting timer
10:23:56.2 DownloadCurrentMetars thread started
10:23:56.2 Metar13Z.TXT started
10:23:56.2 lTAF12Z.TXT started
10:23:56.2 sTAF12Z.TXT started
10:23:56.2 Metar14Z.TXT started
10:23:56.3 sTAF12Z.TXT done
10:23:56.3 sTAF06Z.TXT started
10:23:56.5 sTAF06Z.TXT done
10:23:56.5 lTAF06Z.TXT started
10:23:56.9 lTAF12Z.TXT done
10:23:57.0 IsDataLoaded: FSX
10:23:57.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:23:57.0 IsDataLoaded: FS9
10:23:57.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:23:57.1 IsDataLoaded: P3D
10:23:57.1 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:23:57.1 IsDataLoaded: XPlane
10:23:57.1 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:23:57.5 Metar14Z.TXT done
10:23:58.3 lTAF06Z.TXT done
10:23:58.7 Stopping timer
10:23:58.7 StartMap
10:23:59.2 Metar13Z.TXT done
10:23:59.2 DownloadCurrentMetars done
10:23:59.9 ProcessMetars done
10:24:05.1

---===+++===---

10:24:05.1 Starting Plan-G (W7 edition), build 3.1.3.109
10:24:05.1 OS is Microsoft Windows NT 6.2.9200.0
10:24:05.2 InitDataFolder
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_NAVI.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\UserWaypoints.sdf
10:24:05.2 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\MEF.sdf
10:24:05.6 Map tiles cache: C:\Users\MALBERTO\AppData\Local\GMap.NET\
10:24:05.7 Program in: C:\Program Files (x86)\Plan-G v3.1.3
10:24:05.7 Data in: C:\Users\MALBERTO\Documents\Plan-G Files
10:24:05.7 IsDataLoaded: FSX
10:24:05.7 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:24:05.7 IsDataLoaded: FS9
10:24:05.7 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:24:05.7 IsDataLoaded: XPlane
10:24:05.7 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:24:05.8 ASI: numIncrement = 50 incremental = 60 GPS_MaxAirspeed = 300
10:24:05.9 Starting timer
10:24:05.9 DownloadCurrentMetars thread started
10:24:05.9 Metar13Z.TXT started
10:24:05.9 lTAF12Z.TXT started
10:24:05.9 Metar14Z.TXT started
10:24:05.9 sTAF12Z.TXT started
10:24:06.1 sTAF12Z.TXT done
10:24:06.1 sTAF06Z.TXT started
10:24:06.4 sTAF06Z.TXT done
10:24:06.4 lTAF06Z.TXT started
10:24:06.6 lTAF12Z.TXT done
10:24:06.8 IsDataLoaded: FSX
10:24:06.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:24:06.8 IsDataLoaded: FS9
10:24:06.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:24:06.8 IsDataLoaded: P3D
10:24:06.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:24:06.8 IsDataLoaded: XPlane
10:24:06.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:24:07.7 Metar13Z.TXT done
10:24:07.8 Metar14Z.TXT done
10:24:08.1 lTAF06Z.TXT done
10:24:08.1 DownloadCurrentMetars done
10:24:08.4 Stopping timer
10:24:08.4 StartMap
10:24:08.8 ProcessMetars done
10:24:10.5 Cleanup
10:24:24.9 Connection string: metadata=res://*/Data.FSData.csdl|res://*/Data.FSData.ssdl|res://*/Data.FSData.msl;provider=System.Data.SqlServerCe.3.5;provider connection string='Data Source=|DataDirectory|\Data\PlanG3_XPX.sdf'
10:24:25.3 DCT
10:25:14.4 A NDB
10:25:14.5 AN VOR
10:25:14.8 AND VOR
10:25:15.2 ANDL Unknown!
10:25:15.7 ANDLE ISEC
10:25:18.0 ANDLE ISEC
10:25:19.1 ANDLE ISEC
10:25:19.2 Z NDB
10:25:19.4 ANDLE ISEC
10:25:19.4 ZA NDB
10:25:19.8 ANDLE ISEC
10:25:19.9 ZAB NDB
10:25:21.8 ANDLE ISEC
10:25:21.8 ZABK Unknown!
10:25:22.2 ANDLE ISEC
10:25:22.2 ZABKI ISEC
10:25:22.9 ANDLE ISEC
10:25:23.0 ZABKI ISEC
10:25:26.7 ANDLE ISEC
10:25:26.7 ZABKI ISEC
10:25:26.8 K NDB
10:25:27.3 ANDLE ISEC
10:25:27.3 ZABKI ISEC
10:25:27.3 KT VOR
10:25:27.7 ANDLE ISEC
10:25:27.8 ZABKI ISEC
10:25:27.8 KTE VOR
10:25:28.4 ANDLE ISEC
10:25:28.4 ZABKI ISEC
10:25:28.4 KTEB Airport
10:25:31.1 Quick Plan: From KJFK (John F Kennedy Intl) to KEWR (Newark Liberty Intl) Route ANDLE ZABKI KTEB
10:25:31.1 Add Airport: -1 KJFK
10:25:31.1 ANDLE ISEC
10:25:31.2 ZABKI ISEC
10:25:31.3 Add Airport: -1 KTEB
10:25:31.3 KTEB Airport
10:25:31.3 Add Airport: -1 KEWR
10:25:31.4 NdbsInBounds 11
10:25:31.4 VorsInBounds 15
10:25:32.3 AirportsInBounds 234
10:25:32.7 HelipadsInBounds 170
10:25:32.8 NdbsInBounds 11
10:25:32.9 VorsInBounds 15
10:25:32.9 AirportsInBounds 234
10:25:33.0 HelipadsInBounds 170
10:25:33.0 Std Metar: KJFK 151351Z 26017G22KT 10SM BKN049 13/01 A2979 RMK AO2 SLP089 T01280006 $
10:25:33.0 Std Metar: KTEB 151351Z 27008KT 10SM BKN049 OVC055 12/01 A2977 RMK AO2 SLP081 T01220006 $
10:25:33.0 Std Metar: KEWR 151351Z 27019G23KT 10SM FEW037 SCT090 SCT260 13/02 A2979 RMK AO2 SLP087 T01330017
10:25:40.7 NdbsInBounds 11
10:25:40.7 VorsInBounds 16
10:25:40.8 AirportsInBounds 237
10:25:40.9 HelipadsInBounds 172
10:29:57.1 Cleanup
10:39:37.9

---===+++===---

10:39:37.9 Starting Plan-G (W7 edition), build 3.1.3.109
10:39:37.9 OS is Microsoft Windows NT 6.2.9200.0
10:39:38.0 InitDataFolder
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_NAVI.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\UserWaypoints.sdf
10:39:38.0 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\MEF.sdf
10:39:38.4 Map tiles cache: C:\Users\MALBERTO\AppData\Local\GMap.NET\
10:39:38.5 Program in: C:\Program Files (x86)\Plan-G v3.1.3
10:39:38.5 Data in: C:\Users\MALBERTO\Documents\Plan-G Files
10:39:38.5 IsDataLoaded: FSX
10:39:38.5 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:39:38.6 IsDataLoaded: FS9
10:39:38.6 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:39:38.6 IsDataLoaded: XPlane
10:39:38.6 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:39:38.6 ASI: numIncrement = 50 incremental = 60 GPS_MaxAirspeed = 300
10:39:38.7 Starting timer
10:39:38.7 DownloadCurrentMetars thread started
10:39:38.8 Metar13Z.TXT started
10:39:38.8 sTAF12Z.TXT started
10:39:38.8 lTAF12Z.TXT started
10:39:38.8 Metar14Z.TXT started
10:39:38.9 sTAF12Z.TXT done
10:39:38.9 sTAF06Z.TXT started
10:39:39.3 sTAF06Z.TXT done
10:39:39.3 lTAF06Z.TXT started
10:39:39.6 lTAF12Z.TXT done
10:39:39.8 IsDataLoaded: FSX
10:39:39.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FSX.sdf
10:39:39.8 IsDataLoaded: FS9
10:39:39.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_FS9.sdf
10:39:39.8 IsDataLoaded: P3D
10:39:39.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_P3D.sdf
10:39:39.8 IsDataLoaded: XPlane
10:39:39.8 Data Source = C:\Users\MALBERTO\Documents\Plan-G Files\Data\PlanG3_XPX.sdf
10:39:40.5 lTAF06Z.TXT done
10:39:40.9 Metar14Z.TXT done
10:39:41.3 Stopping timer
10:39:41.3 StartMap
10:39:41.3 Connection string: metadata=res://*/Data.FSData.csdl|res://*/Data.FSData.ssdl|res://*/Data.FSData.msl;provider=System.Data.SqlServerCe.3.5;provider connection string='Data Source=|DataDirectory|\Data\PlanG3_XPX.sdf'
10:39:41.3 Metar13Z.TXT done
10:39:41.3 DownloadCurrentMetars done
10:39:41.5 NdbsInBounds 11
10:39:41.6 VorsInBounds 16
10:39:42.1 ProcessMetars done
10:39:42.3 AirportsInBounds 237
10:39:42.6 HelipadsInBounds 172
10:39:42.7 NdbsInBounds 11
10:39:42.7 VorsInBounds 16
10:39:42.8 AirportsInBounds 237
10:39:42.9 HelipadsInBounds 172
10:39:45.5 ANDLE ISEC
10:39:45.5 ZABKI ISEC
10:39:45.6 KTEB Airport
10:39:48.9 Quick Plan: From KJFK (John F Kennedy Intl) to KEWR (Newark Liberty Intl) Route ANDLE ZABKI KTEB
10:39:48.9 Add Airport: -1 KJFK
10:39:49.0 ANDLE ISEC
10:39:49.1 ZABKI ISEC
10:39:49.2 Add Airport: -1 KTEB
10:39:49.2 KTEB Airport
10:39:49.2 Add Airport: -1 KEWR
10:39:49.3 NdbsInBounds 11
10:39:49.3 VorsInBounds 15
10:39:49.3 AirportsInBounds 234
10:39:49.4 HelipadsInBounds 170
10:39:49.4 NdbsInBounds 11
10:39:49.5 VorsInBounds 15
10:39:49.5 AirportsInBounds 234
10:39:49.6 HelipadsInBounds 170
10:39:49.6 NdbsInBounds 11
10:39:49.6 VorsInBounds 15
10:39:49.7 AirportsInBounds 234
10:39:49.8 HelipadsInBounds 170
10:39:49.8 Std Metar: KJFK 151351Z 26017G22KT 10SM BKN049 13/01 A2979 RMK AO2 SLP089 T01280006 $
10:39:49.8 Std Metar: KTEB 151351Z 27008KT 10SM BKN049 OVC055 12/01 A2977 RMK AO2 SLP081 T01220006 $
10:39:49.8 Std Metar: KEWR 151351Z 27019G23KT 10SM FEW037 SCT090 SCT260 13/02 A2979 RMK AO2 SLP087 T01330017
10:39:51.4 ISEC 0
10:39:52.9 NdbsInBounds 9
10:39:52.9 VorsInBounds 15
10:39:53.0 AirportsInBounds 238
10:39:53.1 HelipadsInBounds 173

Tim,
Thanks

Hi,
Have been running Plan G v3.1.3, Win 10 successfully for a while now.  Everything works fine, except the Plan Elevation.  Downloaded and installed the DEM files in the correct folder but still Plan Elevation shows nothing.  I figure that maybe Win 10 have something to do with it.
Does anybody  in this forum have had the same problem?
Thanks in advance for any input.

Mario