News:

Thou shalt confirm thine airspeed on final, lest the earth rise up and smite thee. (pre-landing checklist, v1)

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - solpuerto

#1
Plan-G / Network problem
March 29, 2010, 06:06:18 PM
My first post was under "Many Thanks" and that developed into trying to resolve a network problem. I have checked and double checked the network address as suggested by Tim. I first tried this with Win 7 16bit on the FSX PC and Vista 32bit on my laptop but with no success. I then installed Win 7 32bit on the Laptop and tried that but end up with the same Timeout message when I try to connect with FSX open. I have tried IPv4 and IPv6

I am able to build the FSX database on the Laptop so this suggest to me my network is not the problem, but I do not know what different protocols are run when you try to connect Plan-G to FSX on a network.

Has anyone any further helpful comments/suggestions?
:'(



#2
Plan-G / Re: Many Thanks
March 22, 2010, 05:18:12 PM
Meant to say the log file still shows this DEBUG: removeAircraftOverlays    ?????
#3
Plan-G / Re: Many Thanks
March 22, 2010, 05:14:18 PM
Hi Tim

Thanks for all of that.

I had carried out the first 2 tasks to get the FSX and Plan-G folders shared by Everyone.

It was the Mapping bit I was not sure of and thanks for the explanation.

I now have the Flight Plans avaible in FSx and Plan-G.

Unfortunately I still have the timeout problem and though I can fly the FP from Plan-G nothing happens on the map.






#4
Plan-G / Re: Many Thanks
March 22, 2010, 03:21:57 PM
Hello again

You are getting a bit beyond my knowledge.

I can access/open the Flight Simulator X Files on the FSX PC from my Vista Portable.

I have made a note of the path as you outline.

This is where I struggle.

I have created a mapped  N drive with the path to the folder (Is this just to My Documents or to the Sim X Files folder?) on the FSX PC and I can see this linked to the FSX PC under explorer. If I click on this mapped drive it opens up the FSX PC Sim X Folder.

I cannot see it from the Vista Portable.

How do I get Plan-G to write/read to this drive?

Sorry for not being to clear about what needs to be done.
#5
Plan-G / Re: Many Thanks
March 22, 2010, 01:41:11 PM
Hi Tim

Not sure about your Antivirus question but I run AVG

UAC is off and both Pc's are running as Administrator.

Plan-G is writing the Flight Plans I create in a Flight Simulator X Files folder on the Portable and they are not passed to the equivalent folder on the FSX PC.

Here are the last few lines in the log file if any use, not sure what the last line means?

13:20:32 Opening Flight Plan
13:20:32 NodeList Item#0 Descr
13:20:32 NodeList Item#1 FlightPlan.FlightPlan
13:20:32 Waypoint = AirportN55° 56' 39.092272",W3° 23' 22.441156",+000134.00EGPH
13:20:33 Waypoint = IntersectionN56° 2' 56.980385",W3° 4' 41.299782",+000000.00EGPHE11
13:20:33 Waypoint = IntersectionN56° 16' 58.199721",W4° 20' 57.730401",+000000.00EGD014Y
13:20:33 Waypoint = IntersectionN56° 2' 27.879758",W4° 7' 15.529268",+000000.00EGD052O
13:20:33 Waypoint = AirportN55° 52' 19.000744",W4° 25' 58.999336",+000022.00EGPF
13:20:33 MEF Metres = 713 Feet = 2339 Rounded == 2400

13:20:33 Plan: TrueBrg=58.8126934507615 var=5 MagBrg=64 dist=11.5
13:20:33 MEF Metres = 912 Feet = 2992 Rounded == 3000

13:20:33 Plan: TrueBrg=288.797153628803 var=4.59999990463257 MagBrg=293 dist=44.7
13:20:33 MEF Metres = 912 Feet = 2992 Rounded == 3000

13:20:33 Plan: TrueBrg=152.158039742753 var=5.30000019073486 MagBrg=157 dist=16.4
13:20:33 MEF Metres = 912 Feet = 2992 Rounded == 3000

13:20:33 Plan: TrueBrg=226.058019919353 var=5.09999990463257 MagBrg=231 dist=14.6
13:20:33 CalculateRoute took 0.387 seconds
13:20:33 Drawing Flight Plan
13:20:33 DisplayFlightPlanDetail. MoveMap = True nodes = 5
13:20:35 Setting VFR/IFR flag
13:20:35 Checking plan weather (FSX only)
13:20:35 UpdatePlanWeather testing IsConnected
13:20:35 UpdatePlanWeather calling RequestWeatherForPlan
13:20:45 SimConnect remote connection timed out
13:20:51  DEBUG: removeAircraftOverlays
#6
Plan-G / Re: Many Thanks
March 22, 2010, 12:08:19 PM
Hi Tim

Many thanks for your reply.

Yes I have checked the IP and it is the PC running FSX.
I did mention that the Laptop was running Vista 32bit.

I have now tried IPv4 and I have been able to load the databases, so that is considerable progress and I thought I (or you) had cracked it.

However I am now getting a message about "unable to connect (timeout) check FSX running and that protocol settings are correct"
FSX is running.
I have created a Flight Plan in Plan-G but this does not appear if I try to Load it in FSX. The same is true if I create one in FSX, it does not appear in Plan-G

I have also tried disabling the firewalls on both computers but no difference.

#7
Plan-G / Many Thanks
March 21, 2010, 10:00:16 PM
Hi

Fairly new to FSX and the addition of your Plan G functionality is just great. Many thanks for all your work and making this available.

I have had it running for a few days now with FSX on my main PC and no problems. This PC has Windows 7 16bit.

I have tried to set it up on my laptop which is Vista 32bit but it cannot locate the database in FSX on the PC. I followed the manual using SimConnect and created the required xml file in the FSX directory as follows,

<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
  <Descr>SimConnect</Descr>
  <Filename>SimConnect.xml</Filename>
  <SimConnect.Comm>
    <Disabled>False</Disabled>
    <Protocol>IPv6</Protocol>
    <Scope>link-local</Scope>
    <MaxClients>64</MaxClients>
    <Address>fe80::f5a6:dcf:fcd2:ac84</Address>
    <Port>4506</Port>
  </SimConnect.Comm>

The following is a copy of the Plan-G_log

21:15:11 PlanG constructor
21:15:11 executableFolder: C:\FSX\PlanG\Plan-G
21:15:11 Starting Plan-G, build 0.9.1.423
21:15:12 Selected data set is FSX
21:15:12 Starting map
21:15:12 Initialisation complete.
21:15:33 RibbonButton_Click_ConnectFS
21:15:33 SimConnect.Connect
21:15:33 SimConnect.Connect - Remote. Mode = IPv6 Server = fe80::f5a6:dcf:fcd2:ac84 Port = 4506
21:16:13 PlanG constructor
21:16:13 executableFolder: C:\FSX\PlanG\Plan-G
21:16:14 Starting Plan-G, build 0.9.1.423
21:16:14 Selected data set is FSX
21:16:14 Starting map
21:16:14 Initialisation complete.
21:34:43 PlanG constructor
21:34:43 executableFolder: C:\FSX\PlanG\Plan-G
21:34:44 Starting Plan-G, build 0.9.1.423
21:34:44 Selected data set is FSX
21:34:44 Starting map
21:34:44 Initialisation complete.
21:35:22 UpdatePlanWeather testing IsConnected
21:36:07 PlotLargeILSs. 0 airports
21:36:07 PlotLargeILSs done. 0 new ILSs
21:36:07 PlotMedILSs. 0 airports
21:36:07 PlotMedILSs done. 0 new ILSs
21:36:07 PlotSmallILSs. 0 airports
21:36:07 PlotSmallILSs done. 0 new ILSs

I hope they are of some help and many thanks in advance for any pointers.

Again great product