Probleme open flight plan

[navion]

hello,

I have a problem when I try to open a "big" flight plan.
Start FSX, Plan-- 380. Then connect to FS.

When I want to open my plan nothing happend ... plan G freeze. I wait 3 minutes and closed PlanG

I have test same plan with plan G 0.3.2.365, 10 seconds to open this plan.

Have uncheck "display weather" and "update local " but same problem.

Is it because my flight plan is too big ?

claude

[tim arnot]

There's no reason it shouldn't open. It took about 15 seconds on my PC - 5 to open the file and load the data, and 10 for google to draw it. Your log shows a similar time to open the file (6 seconds, 5 seconds), and no error coming back from google, so it should have sent you the rendered overlay.

[navion]

Ok

Réinstall Plan-G
Build data FS9 & FSX

Start FS9 & Plan-G
Load plan - 5 seconds
connect - 11 seconds

Start FSX & plan-G
select data FSX
load plan - 11 seconds
connect  - 4 minutes


Mystery of computer  :'(

claude

[tim arnot]

Have you defragged your hard drive recently?

[navion]

I'm using Tunes Up Utilities 2009 for computeur maintenance.

When I take a look to "plan G.log" file I see :
- FS9 = 1 second to load 10 airports weather
- FSX = 2 seconds to only load 1 airport weather. So with around 100 airport, time to load flight plan is around 3 or 4 minutes.

I have to cut this plan in 5 parts.

Another question  :D

I made a mistake and try to load a flight plan that I have delate in my PC ..... Plan G stopped.
I have a window in french "Plan G has found a problem and must stopped ......"
Is it a way to delate flight plan in window "recent flight plans" ?

claude

[tim arnot]

Only by opening/saving more flight plans, till it drops off the bottom of the list.

And try to make sure you're connected to FSX using SimConnect - the weather interface is much better and faster than FSUIPC.

[navion]

I have check "auto" in window FS connection.

claude

[tim arnot]

Your log shows you are connected with FSUIPC. You may have to change the Simconnect connection type to IPv6 or IPv4 if the default pipe can't connect.