News:

Thou shalt confirm thine airspeed on final, lest the earth rise up and smite thee. (pre-landing checklist, v1)

Main Menu

Problem picking up flight plan on next load.

Started by w9nwrwi, September 11, 2013, 10:10:43 PM

Previous topic - Next topic

w9nwrwi

Running X-Plane 10.22 64 bit. 
I can load up a plan within plan-g (V3.06 build 67), route and plan is displayed just fine.  I load the plan (.FMS) into x-plane, the on board GPS shows the proper waypoints, airports, etc. loaded by using the FMS/Key_load command in X-plane.

Flight goes on, following route just as I would expect it to do. Now, if I land at an interm airport (not in plan) and exit both systems to bring them back up later,  upon restarting both Plan-G and X-plane and load plans how do I get Plan-G to tell the X-plane GPS where its at?  It wants to revert back to the starting (first waypoint) point.
I tried invoking "make this the active leg" but that did not work. Matter of fact Make This The Active Leg no longer appears upon a right click of the waypoint within the plan-G pop-up.

I am not sure if this is a X-plane problem or a Plan-G problem, or maybe its no problem at all and not designed to do that.

If I enter a waypoint manually into the X-Plane GPS it still shows a heading number of back to the start point. (it is still seeing Plan data)

As long as I keep flying from start to finish its perfect, it's just the "remain overnight" stop! :) that gives a problem.

Thanks for any assistance/thoughts.

Chuck
Computer:
CPU:i7-6700 4.0GHz, Ram:32GB,  Video.Card: GTX 1070 8Gb, OS:Win 10, 3ea 24" HDMI Widescreen.
X-Plane 11

tim arnot

Plan-G doesn't interact with the onboard GPS - it's not designed to do that.

IRL, if you divert for an overnight stop, you would close out your flight plan and file a new one the next day from your new origin. Resuming a partially complete flight plan isn't expected behaviour, although many GPS units do have an advance active leg function, and that might work in X-Plane, depending on how thoroughly the device has been implemented (you might need a RW GPS manual to figure it out though)

An alternative is to split the plan in PG into smaller segments (you can use the Save As Snippet facility)

Tim. @TimArnot

w9nwrwi

Tim,

Ok, got it and it makes sense.  I did not even think about the real life situation  :-[, I know what I need to do now, break that plan(s) into a couple more realistic plan situations.


Thanks,

Chuck
Computer:
CPU:i7-6700 4.0GHz, Ram:32GB,  Video.Card: GTX 1070 8Gb, OS:Win 10, 3ea 24" HDMI Widescreen.
X-Plane 11