Build 50

[tim arnot]

This is a test build. If you've had problems with build 46/47/48/49 please try it.

• Sample aircraft profile now included (Baron 58). You'll need to copy this to the Profiles folder (the installer puts it in the correct place automatically)
• Runway orientation fix, take 3
• Fixed file dialog filters for .profile and .fms broken in French localisation
• Now creates empty DEM folder on startup if not present
• Fixed drag waypoint would sometimes snap to a navaid when it shouldn't
• Fixed Kml reader failed to load <linestring> objects
• Fixed map repositioning in error if kml reader fails
• Language setting now preserved between sessions
• Added right-click can extend plan with temporary waypoint (and insert before/after wpt selected in list)
• Fixed X-Plane export invalid with non-English locales
• Fixed X-Plane build database failed on undocumented runway values in some addons
• Fixed X-Plane runway orientation incorrect in Aerodrome diagram (must rebuild db)
• Fixed text cut off in export buttons (Italian)
• Fixed Vatsim data error with non-english locales
• Fixed left-click on plan marker made tooltip an orphan
• Fixed import FSX plan failed if ISEC was invalid
• Fixed error writing parking data with latest X-Plane dataset
• Fixed VOR Radial render used ambient magvar not the value embedded in the VOR data
• Fixed error reading v2 Trail files

Zipped files build:
To install: Unzip to the folder of your choice.
DO NOT Overwrite your existing v3 folder
DO NOT uninstall your existing v3 install.
http://www.tasoftware.co.uk/plan-g/files/PG3_b50.zip

Installer build:
To install: Uninstall your current v3
Run setup.exe
http://www.tasoftware.co.uk/plan-g/files/Plan-Gv3.0.1.50.zip

Please report back in a comment to this thread, either confirming your issue is fixed, or not.

[Emile]

Hello,
My problem IS SOLVED.
FYI with the "Asia Airports".
Thanks a lot and congratulations :singing:

[sky one]

Hi Tim,

to import the MSFS exported "Airspaces Table" it's mandatory to use the dot as decimal separator (in Control panel -> International settings).
(I'm' referring to this post: http://www.tasoftware.co.uk/forum/index.php?topic=1965.msg10334#msg10334 )

Ciao

[Emile]

Hello,
V3 50 installed to Portable PC , I have difficulties keyin the IP address. When I keyin the first digit (a 1) a window opens with Flight Plan and I need to reposition the cursor in the right position and keyin the digit again, This for each digit ...

[golfbravo]

Hello,

Problem not solved here, the program crashes at launch with this message.


I tested with build50.zip and build50 setup.exe, same result.
Regards

[w9nwrwi]

Tim,

Since this does concern build 50 I will post this here among the other problems addressed.

If you get an opportunity please take a look at the attached log file.

The problem: Build 49 works just fine.
                   Build 50 brings up the map but no airport data whatsoever, no airports, no ILS, Nav Aids. Data import (X-Plane) worked just fine.

The log file, has both a build 49 and a build 50 instance of loading.


In the build 50 instance I do see a error of "too many apts."

Thanks,

Chuck

[GAJ52]

Hi Chuck

I had this as well, try going to the View tab and click the 'Map Overlays' off then on again.

Glen

[w9nwrwi]

Thanks for the hint Glen,

No luck here doing that.

Chuck

[sky one]

• Runway orientation fix, take 3

It seems to be fixed!  ;)

[tim arnot]

What's your location and zoom level?

Tim,

Since this does concern build 50 I will post this here among the other problems addressed.

If you get an opportunity please take a look at the attached log file.

The problem: Build 49 works just fine.
                   Build 50 brings up the map but no airport data whatsoever, no airports, no ILS, Nav Aids. Data import (X-Plane) worked just fine.

The log file, has both a build 49 and a build 50 instance of loading.


In the build 50 instance I do see a error of "too many apts."

Thanks,

Chuck

[w9nwrwi]

Thank you Tim,

Sigh......Now here is a case of egg on one's face!!!!! My apologies for the bandwidth...   :-[ :-[ :-[ :-[ :-\ :-\

You hit the nail right on the Zoom head, all is well.

Chuck

[tim arnot]

The caps are there from the old google days, because attempting to render that many markers would cause google's server to throw a hissy fit. Since the rendering is now done internally, I guess I could take them out, but it will still be very slow drawing that many markers.

[ronaldi40]

Wann gibt es die Satelliten, Hybrid, Karte, Gelände und Earth Ansicht wieder???

When there is again the satellite, hybrid, map, terrain and Earth View???

[Sam2299]

Hi Tim

Have checked Build 50.
My three findings still have to be solved.
-Trail breadcrumb file can't be displayed on "connect" mode.
-Nav fq' can't be dial.
Deviation ruler yellow marker not displayed.

Sam

[golfbravo]

Hello,

Problem not solved here, the program crashes at launch with this message.


I tested with build50.zip and build50 setup.exe, same result.
Regards

Hi,

All is fine  this morning probabely due to a good night for my computer  ;) ;)
Drag and drop work fine too.
Thanks.