News:

Plan-G has over 1700 followers on FACEBOOK! Click HERE and add your support

Main Menu

3.1.3 beta/test build - 113

Started by tim arnot, August 09, 2015, 04:27:01 PM

Previous topic - Next topic

tim arnot

* Mapbox V4 supported. You now need to specify a map ID (e.g."mapbox.streets", "mapbox.satellite" etc.) as well as the access key.
* NEW: Planned Altitude display puts a "T bar" in front of the aircraft, showing where it will reach the specified altitude. In level flight the system can show a T-Bar to the ground (or other altitude) at a ficed descent rate, for glide profiles or planning start of descent etc.
* Fixed Aircraft profile dialog did not include performance elements for turbine aircraft
* X-Plane airspace display (incomplete & still buggy)
* Fixed error if airport identifier longer than 6 characters (X-Plane)
* Added airspace altitude range for map display (e.g. only show airspace above 10000 ft)
* Airspace training areas now shown in dark blue
* Removed filename restrictions when scanning FSX/FS9/P3D bgls for database
* Added ability to move waypoints within the plan list using drag & drop (note: for multiselect, you must now hold down SHIFT. Multiple selections cannot be dragged.)
* Added Spanish localisation (incomplete). Thanks to Luis M. Lázaro Tauroni
* Fixed KML/KMZ icons did not show description text in popup
* "autoexport" temporary file now written if export filename dialog fails (rename/copy this BEFORE closing Plan-G or starting a new flight plan if you want to keep it)
* Adjustments to sync mode safe zone
* Fixed crash if plan has no endpoint due to overloading markers at extreme zoom with override on
* Fixed info panel Lat/Lon was not formatted according to preferences
* Waypoint Lat & Lon added to flight plan window
* Fixed some menus did not refresh on language change
* Fixed crash sometimes on deleting multiple waypoints from the front of a plan.
* Fixed KML failed to display if a marker image was null.
* Can now set ILS freq by right clicking on feather.

Please download from the main page.

Tim. @TimArnot

Emile

Hello,
only Win 7?
Thanks in advance
Emile EBBR Asus P7P67 Pro v3, Intel 1155 3.4 GH, Cordair DDR3 8Gb,PCX Nvidia 950 ti,PCX Nvidia 1150 ti,
SSD 120Gb, 2 x 1 Tera SATA6, Dual Boot .

bcbarnes

Emile,

I updated from 3.1.2 with this on a Win10 machine and it seems to be fine. Obviously didn't try building databases on Win10.
 

Emile

#3
Hello,
Installed on FSX SE Win 8.1 and DB Build done ... All OK

Installed on FSX Win 10 and DB Build done and OK

Win 10 "X" right upper corner does NOT work, have to close via Windows
Emile EBBR Asus P7P67 Pro v3, Intel 1155 3.4 GH, Cordair DDR3 8Gb,PCX Nvidia 950 ti,PCX Nvidia 1150 ti,
SSD 120Gb, 2 x 1 Tera SATA6, Dual Boot .

tim arnot

Win7 & later. There's no xp build at this time.

Tim. @TimArnot

Birdy.dma

Hello Tim,

Installed with X Plane (10.36) and Win 10, new data base builded.

For now, the only bug i found: X-Plane airspaces are not displayed. Tested in the USA.

Claude.

vgbaron

Not using mapbox 4 just the old id. Getting blue 404 errors on map.

Thanx,

Vic
P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - 2-GTX1070 SLI 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX680 DH14 850W 2-1TB WD HDD,1tb VRap, Armor+

gaab

Hello,

There is still this annoying disappearance of all airports, NDB, VOR, Isec (but not ILS/LOC, which stay visible...) when closing FSX before disconnecting Plan-G...
I have to unclick/click the select box to get them back (even after restarting FSX and connecting).

I know I should do it in the right order, but I always forget...

Please, could you do something for me :)
Thanks.

tim arnot

Quote from: gaab on August 15, 2015, 05:40:29 PM
Hello,

There is still this annoying disappearance of all airports, NDB, VOR, Isec (but not ILS/LOC, which stay visible...) when closing FSX before disconnecting Plan-G...
I have to unclick/click the select box to get them back (even after restarting FSX and connecting).

I know I should do it in the right order, but I always forget...

Please, could you do something for me :)
Thanks.

I'll look at it :)

Tim. @TimArnot

gaab

Quote from: tim arnot on August 16, 2015, 11:11:42 AM
I'll look at it :)

Forgot to mention that I am using FSUIPC connection on the same PC as FSX (Windows 7 64bits).

Thanks

vgbaron

OK - what am I missing - I can NOT get this version to accept my MAPBOX id. I am not using V4, cannot find any reference to v4 on Mapbox site. Tried my usual ID - no joy - tried mapbox.streets.access key - accepts but get blue screens.

It's probably something simple but so far, I cannot use this version.

Thanx!

Vic
P3D#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - 2-GTX1070 SLI 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
P3D#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX680 DH14 850W 2-1TB WD HDD,1tb VRap, Armor+

tim arnot

Hmm. My understanding was that they'g gone completely over to v4, but perhaps not.  I'll put a v3 option back in for the next build.

Tim. @TimArnot

dempsey

Works fine as far as I can see. I connect to X-Plane 10.40beta9 and flight path is tracked. Also rebuild the database. All went fine.

I don't see any airspace either; using Canadian and some USA airspace. I saw them being process while building the database though.

This also brings me to a request. It would be nice to see what is actually loaded in the database. I am not looking for details, but more like a count summary like number of air spaces, number of airports, etc..
Dempsey

X-Plane 11.25, Plan-G 3.2.1.151

tim arnot

That information should be in the log. :)

Tim. @TimArnot

dempsey

Silly me that I didn't see that; thanks Tim.

Now that I look closer I see something strange immediately after line 1515 in the log. Can you have a look at that please.
Dempsey

X-Plane 11.25, Plan-G 3.2.1.151