Plan G Map Overlays & Quick Plan Not Working

[termito]

Hi Tim,
Due to a hard drive crash had to reinstall Win 10, 64 Bit in a new SSD drive.  Everything went fine as i had a drive backup, except for Plan G3.
Installed Plan G3 (v3.1.3.113) and build the database as per the manual, however when i tried the Quick Plan feature, after i type the first three letters for the Airport, i.e. KJFK the rectangle becomes red.

Also, when i go to View and check Map Overlays, nothing comes up.
My previous Plan G3 was working flawlessly.  Can't figure this one out.
Any help will be appreciated,
Thanks,

Mario
:(  :(

[tim arnot]

First thing, check the log for errors.

When I reloaded Win10, I found I had to reinstall the SQLCe 3.5 libraries too. Win 10 had installed 4.0, which Plan-G didn't like. Might not be the same thing, but it's somewhere to look.

[termito]

Tim,
Spent more than 1 hour and finally found out on the Top Menu > Data > Display X-Plane 9/10 Data was not checked.  After checking it, that did it, works fine now.  Still have one minor problem, when i right click on an Airport icon > Show Airport Diagram, the airport do not display correctly. 
Please, see attached JPEG file.
Again thanks for all your help.

Mario