News:

Thou shalt confirm thine airspeed on final, lest the earth rise up and smite thee. (pre-landing checklist, v1)

Main Menu

Test version 3.2.0.143 * NEW 08/10/2017 *

Started by tim arnot, October 21, 2016, 12:20:44 PM

Previous topic - Next topic

opjose

The new Build worked with XP-11 and all of my airports.

Attached is the log.

I did not run it as administrator.


opjose

Well maybe not!

I was able to see the airports immediately after the build completed.

I exited Plan-G and about an hour later went back into it to generate a flight plan.

Now no airports appear.

There is nothing in the log indicating problems reading the data files.

The generated PlanG3_XPX.sdf file is 249,748KB in size.



opjose

#257
More info:

VERY strange...

If I revert back to the prior build AFTER the databases have been generated by your test build, the airports appear.

I renamed the EXE's to do this. I did not re-install.

The Airports, NDBs & VORs do not appear using the test build after the initial run.


tim arnot

Sometimes markers don't draw on startup (it's a very old bug that no one has been able to track down, and only happens sometimes to some people). Try moving the map about, zooming in & out etc - that should kick them into life.

Tim. @TimArnot

opjose

Nothing I do causes them to appear using the version that permits the completion of the database build.

Zooming in, zooming out, switching to a different area of the world, etc.


When I switch back to the prior version, they appear within a second.

Thanks.

tim arnot

Very odd.

Can I hear from a few people who *can* build the XP11 database? For the sake of comparison: PC spec, OS & locale, and data revision (You'll see that in the log as, e.g. "1100 Version - data cycle 1710")

Thanks.

Tim. @TimArnot

canadianbacon

I can't get the data base to build either on XP11. Have attached my Plan-G_Log. I was able to get the airports to display if I cancelled the build halfway through, but everything seems to be deleted if I let the whole build go through. I used to use the program in P3D, but haven't been able to get it to install in XP11 yet.

Gunduran

#262
Hi all,

I tried to run Plan-G the first time two weeks ago with the standard version ant then with the test version. I'm using X-Plane 11 (only).
The installation itself went fine but I have my Document folder on my network share. And with this setting it seems like that the to be created data base locks itself.

16:11:34.5 Program in: D:\Spiele\Plan-G v3.1.3
16:11:34.5 Data in: \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files
16:11:34.5 IsDataLoaded: FSX
16:11:34.5 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FSX.sdf
16:11:34.8 IsDataLoaded: FS9
16:11:34.8 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FS9.sdf
16:11:35.0 IsDataLoaded: XPlane
16:11:35.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_XPX.sdf
16:11:35.3 IsDataLoaded: P3D
16:11:35.3 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_P3D.sdf
16:11:35.3 IsDataLoaded: There is a file sharing violation. A different process might be using the file. [ \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_P3D.sdf ]
16:11:35.4 Starting timer


This is already in the beginning but at the end it is also (and here it hangs):

16:19:19.8 Decoding G:\X-Plane 11\Resources\default data\earth_awy.dat
16:19:19.8 PC format
16:19:22.4 Schreibe 34902 Flugplätze
16:19:22.4 BuildDatabase_Executed: There is a file sharing violation. A different process might be using the file. [ \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_XPX.sdf ]
16:25:05.6 Cleanup


I tried it also with the latest update and this is the result:

---===+++ 01/10/2017 +++===---

17:21:50.9 Starting Plan-G (W7 edition), build 3.2.0.137
17:21:50.9 OS is Microsoft Windows NT 6.2.9200.0
17:21:50.9 Plan-G Files folder is: \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files
17:21:51.0 InitDataFolder
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FSX.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FS9.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_XPX.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_P3D.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_NAVI.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\UserWaypoints.sdf
17:21:51.0 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\MEF.sdf
17:21:51.6 Map tiles cache: C:\Users\gundu\AppData\Local\GMap.NET\
17:21:51.6 Program in: D:\Spiele\Plan-G v3.1.3
17:21:51.6 Data in: \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files
17:21:51.7 IsDataLoaded: FSX
17:21:51.7 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FSX.sdf
17:21:52.1 IsDataLoaded: FS9
17:21:52.1 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_FS9.sdf
17:21:52.4 IsDataLoaded: XPlane
17:21:52.4 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_XPX.sdf
17:21:52.7 IsDataLoaded: P3D
17:21:52.7 Data Source = \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_P3D.sdf
17:21:54.0 This build: 320137 Latest build: 312101
17:21:54.0 Starting timer
....

17:28:36.9 Decoding G:\X-Plane 11\Resources\default data\earth_awy.dat
17:28:36.9 PC format
17:28:36.9 1100 Version - data cycle 1611, build 20161011, metadata AwyXP1100. Copyright (c) 2016 Navigraph
17:28:40.1 Schreibe 34902 Flugplätze
17:28:40.1 StartBuild_Executed: There is a file sharing violation. A different process might be using the file. [ \\diskstation\srv-detlev\Sicherung\Dokumente\Dokumente\Plan-G Files\Data\PlanG3_XPX.sdf ]
17:36:54.0 DownloadCurrentMetars thread started


When I changed the Document folder to a local folder it seems to be better, but it is not succeeding but at a different point.
Correction.... it took a while (without any change in the log) but it finally succeeded!

So I created the data base using the local path and then I moved it to the folder on my network. And it works.

I would prefer, to be able to select a data path individually before creating the data base!

P.S. As a data Provider I use Navigraph.

Any help is welcome.
Best wishes
Gunduran

tim arnot

Quote from: Gunduran on October 01, 2017, 05:13:25 PM

I would prefer, to be able to select a data path individually before creating the data base!

P.S. As a data Provider I use Navigraph.

You can. :) This was added to the current build (see the notes). Change the path in Settings->General, and restart Plan-G.

Tim. @TimArnot

normandean

Hi Tim, I have tried version 3.2 in FSX-SE and P3D v4 and in both cases there was not a problem either loading the program to the location I wanted. However, I have a problem with compiling a data base for P3D v4. It compiles OK, but it is not detecting the UK2000 airfields. I thought it may be because I have the new method for inserting scenery, not in the cfg file, but FSDT fields are inserted the same way and they all show, I have tried pointing Plan G at the UK2000 location, but to no avail.

I do not have this problem with FSX-SE where everything has gone in fine.

One other point, that I have always had with P3D and that is I can only connect Plan G using FSUIPC.

Norman

tim arnot

Have you tried putting the UK2000 folders into Plan-G's additional scenery folders list? That should capture anything that doesn't have a scenery.cfg entry.

Also, 3.2 can use the P3D native simconnect library. You need to put a valid simconnect.cfg into the Plan-G program folder and select "Simconnect (P3D)" from the connect options. It's way more reliable than the old FSX library.

Tim. @TimArnot

may433

I've installed V3.2, ran the database builder on P3D v4 (including UK2000 sceneries) and it worked faultlessly.

Aussie157

Finally my database creation problems are a thing of the past  ;D. Knew if I waited long enough it would be fixed  8).

normandean

Hi Tim, yes I have put a pointer to the UK2000 folder in the options/locations but no joy.

Norman

tim arnot


Tim. @TimArnot